Just to be clear: There are TWO versions of VFPA ("A" like the Hex notation of "10")
a) the patched version of your existing VFP9 installation. This implies that it's stil a 23Bit version. This is the version you most probably want to use immediately. Download the 32Bit on the bottom of: http://baiyujia.com/vfpadvanced/f_vfpa_about.asp It needs a current VFP9 installation with SP2, and then creates a new directory with a patched new VFP9.exe and also copies all of the other files of your VFP9 source directory. Thus, after installation you just rename the old VFP9 directory to something different, and rename the new directory to the original name, and all your Registrykeys and Links will work without interruption.
b) a new VFP10 err... VFPA compiler for 64 bit executables. Stil with some compatibility problems, and I'm not sure if I would ever need it, but: http://baiyujia.com/vfpadvanced/f_vfpa_gotovfpa64.asp
-----Ursprüngliche Nachricht----- Von: ProFox profox-bounces@leafe.com Im Auftrag von Vince Teachout Gesendet: Samstag, 23. November 2019 04:43 An: ProFox Email List profox@leafe.com Betreff: So, about this VFPA thing...
Apparently, I've been under a rock, and there's a magically enhanced VFP9 SP2 that fixes some bugs, can run concurrently with vfp9, and supports 64 bits.
Before I download something, am I on the right site: http://baiyujia.com/vfpadvanced/f_vfpa_about.asp ?
Thanks!
[excessive quoting removed by server]
So I got a new Win10 Pro laptop at the Corporate gig and installed VFP9 on it. It was NOT patched...so the version is Visual FoxPro 09.00.0000.2412 for Windows.
I downloaded the VFPA 32 bit from (a) below and when I go to run it, it fails with this error: https://www.screencast.com/t/XVR3hDpLXOB
I'm guessing that's because I've not patched the default installation to 9.0.0.7423?
Wanted to ask while I search for the VFP9SP2HotFix 3 installer. (I had tried one from wOOdy I thought but got a resource error earlier today...will try again now since I've uninstalled and reinstalled.)
tia, --Mike
On 11/23/2019 6:39 AM, Jürgen Wondzinski wrote:
Just to be clear: There are TWO versions of VFPA ("A" like the Hex notation of "10")
a) the patched version of your existing VFP9 installation. This implies that it's stil a 23Bit version. This is the version you most probably want to use immediately. Download the 32Bit on the bottom of: http://baiyujia.com/vfpadvanced/f_vfpa_about.asp It needs a current VFP9 installation with SP2, and then creates a new directory with a patched new VFP9.exe and also copies all of the other files of your VFP9 source directory. Thus, after installation you just rename the old VFP9 directory to something different, and rename the new directory to the original name, and all your Registrykeys and Links will work without interruption.
b) a new VFP10 err... VFPA compiler for 64 bit executables. Stil with some compatibility problems, and I'm not sure if I would ever need it, but: http://baiyujia.com/vfpadvanced/f_vfpa_gotovfpa64.asp
-----Ursprüngliche Nachricht----- Von: ProFox profox-bounces@leafe.com Im Auftrag von Vince Teachout Gesendet: Samstag, 23. November 2019 04:43 An: ProFox Email List profox@leafe.com Betreff: So, about this VFPA thing...
Apparently, I've been under a rock, and there's a magically enhanced VFP9 SP2 that fixes some bugs, can run concurrently with vfp9, and supports 64 bits.
Before I download something, am I on the right site: http://baiyujia.com/vfpadvanced/f_vfpa_about.asp ?
Thanks!
[excessive quoting removed by server]
Yes, you have to have the fully patched SP2 hotfix 3 version already installed on your system.
Check VFPX on Github for the hotfix installer. I'm pretty sure it got migrated there. If you still have problems, contact me off-list and I can send to you.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of MB Software Solutions, LLC Sent: Monday, January 27, 2020 3:20 PM To: profoxtech@leafe.com Subject: Re: So, about this VFPA thing...
So I got a new Win10 Pro laptop at the Corporate gig and installed VFP9 on it. It was NOT patched...so the version is Visual FoxPro 09.00.0000.2412 for Windows.
I downloaded the VFPA 32 bit from (a) below and when I go to run it, it fails with this error: https://www.screencast.com/t/XVR3hDpLXOB
I'm guessing that's because I've not patched the default installation to 9.0.0.7423?
Wanted to ask while I search for the VFP9SP2HotFix 3 installer. (I had tried one from wOOdy I thought but got a resource error earlier today...will try again now since I've uninstalled and reinstalled.)
tia, --Mike
On 11/23/2019 6:39 AM, Jürgen Wondzinski wrote:
Just to be clear: There are TWO versions of VFPA ("A" like the Hex notation of "10")
a) the patched version of your existing VFP9 installation. This implies that it's stil a 23Bit version. This is the version you most probably want to use immediately. Download the 32Bit on the bottom of: http://baiyujia.com/vfpadvanced/f_vfpa_about.asp It needs a current VFP9 installation with SP2, and then creates a new directory with a patched new VFP9.exe and also copies all of the other files of your VFP9 source directory. Thus, after installation you just rename the old VFP9 directory to something different, and rename the new directory to the original name, and all your Registrykeys and Links will work without interruption.
b) a new VFP10 err... VFPA compiler for 64 bit executables. Stil with some compatibility problems, and I'm not sure if I would ever need it, but: http://baiyujia.com/vfpadvanced/f_vfpa_gotovfpa64.asp
-----Ursprüngliche Nachricht----- Von: ProFox profox-bounces@leafe.com Im Auftrag von Vince Teachout Gesendet: Samstag, 23. November 2019 04:43 An: ProFox Email List profox@leafe.com Betreff: So, about this VFPA thing...
Apparently, I've been under a rock, and there's a magically enhanced VFP9 SP2 that fixes some bugs, can run concurrently with vfp9, and supports 64 bits.
Before I download something, am I on the right site: http://baiyujia.com/vfpadvanced/f_vfpa_about.asp ?
Thanks!
[excessive quoting removed by server]
_______________________________________________ Post Messages to: ProFox@leafe.com Subscription Maintenance: https://mail.leafe.com/mailman/listinfo/profox OT-free version of this list: https://mail.leafe.com/mailman/listinfo/profoxtech Searchable Archive: https://leafe.com/archives This message: https://leafe.com/archives/byMID/09a8c524-286c-b583-fba7-c9c10c55a3f0@mbsoft... ** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious. Report [OT] Abuse: http://leafe.com/reportAbuse/09a8c524-286c-b583-fba7-c9c10c55a3f0@mbsoftware...
This is strange. I downloaded this and ran it but VFP still says .2412. ??? https://github.com/VFPX/VFPRuntimeInstallers/blob/master/VFP9SP2RT.exe
On 1/27/2020 3:32 PM, Richard Kaye wrote:
Yes, you have to have the fully patched SP2 hotfix 3 version already installed on your system.
Check VFPX on Github for the hotfix installer. I'm pretty sure it got migrated there. If you still have problems, contact me off-list and I can send to you.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of MB Software Solutions, LLC Sent: Monday, January 27, 2020 3:20 PM To: profoxtech@leafe.com Subject: Re: So, about this VFPA thing...
So I got a new Win10 Pro laptop at the Corporate gig and installed VFP9 on it. It was NOT patched...so the version is Visual FoxPro 09.00.0000.2412 for Windows.
I downloaded the VFPA 32 bit from (a) below and when I go to run it, it fails with this error: https://www.screencast.com/t/XVR3hDpLXOB
I'm guessing that's because I've not patched the default installation to 9.0.0.7423?
Wanted to ask while I search for the VFP9SP2HotFix 3 installer. (I had tried one from wOOdy I thought but got a resource error earlier today...will try again now since I've uninstalled and reinstalled.)
tia, --Mike
On 11/23/2019 6:39 AM, Jürgen Wondzinski wrote:
Just to be clear: There are TWO versions of VFPA ("A" like the Hex notation of "10")
a) the patched version of your existing VFP9 installation. This implies that it's stil a 23Bit version. This is the version you most probably want to use immediately. Download the 32Bit on the bottom of: http://baiyujia.com/vfpadvanced/f_vfpa_about.asp It needs a current VFP9 installation with SP2, and then creates a new directory with a patched new VFP9.exe and also copies all of the other files of your VFP9 source directory. Thus, after installation you just rename the old VFP9 directory to something different, and rename the new directory to the original name, and all your Registrykeys and Links will work without interruption.
b) a new VFP10 err... VFPA compiler for 64 bit executables. Stil with some compatibility problems, and I'm not sure if I would ever need it, but: http://baiyujia.com/vfpadvanced/f_vfpa_gotovfpa64.asp
-----Ursprüngliche Nachricht----- Von: ProFox profox-bounces@leafe.com Im Auftrag von Vince Teachout Gesendet: Samstag, 23. November 2019 04:43 An: ProFox Email List profox@leafe.com Betreff: So, about this VFPA thing...
Apparently, I've been under a rock, and there's a magically enhanced VFP9 SP2 that fixes some bugs, can run concurrently with vfp9, and supports 64 bits.
Before I download something, am I on the right site: http://baiyujia.com/vfpadvanced/f_vfpa_about.asp ?
Thanks!
[excessive quoting removed by server]
I think that's SP1?
You probably have the VFP DLLs from multiple versions scattered about your system. In particular, check the common files location buried under program files.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of MB Software Solutions, LLC Sent: Monday, January 27, 2020 3:39 PM To: profoxtech@leafe.com Subject: Re: So, about this VFPA thing...
This is strange. I downloaded this and ran it but VFP still says .2412. ??? https://github.com/VFPX/VFPRuntimeInstallers/blob/master/VFP9SP2RT.exe
On 1/27/2020 3:32 PM, Richard Kaye wrote:
Yes, you have to have the fully patched SP2 hotfix 3 version already installed on your system.
Check VFPX on Github for the hotfix installer. I'm pretty sure it got migrated there. If you still have problems, contact me off-list and I can send to you.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of MB Software Solutions, LLC Sent: Monday, January 27, 2020 3:20 PM To: profoxtech@leafe.com Subject: Re: So, about this VFPA thing...
So I got a new Win10 Pro laptop at the Corporate gig and installed VFP9 on it. It was NOT patched...so the version is Visual FoxPro 09.00.0000.2412 for Windows.
I downloaded the VFPA 32 bit from (a) below and when I go to run it, it fails with this error: https://www.screencast.com/t/XVR3hDpLXOB
I'm guessing that's because I've not patched the default installation to 9.0.0.7423?
Wanted to ask while I search for the VFP9SP2HotFix 3 installer. (I had tried one from wOOdy I thought but got a resource error earlier today...will try again now since I've uninstalled and reinstalled.)
tia, --Mike
On 11/23/2019 6:39 AM, Jürgen Wondzinski wrote:
Just to be clear: There are TWO versions of VFPA ("A" like the Hex notation of "10")
a) the patched version of your existing VFP9 installation. This implies that it's stil a 23Bit version. This is the version you most probably want to use immediately. Download the 32Bit on the bottom of: http://baiyujia.com/vfpadvanced/f_vfpa_about.asp It needs a current VFP9 installation with SP2, and then creates a new directory with a patched new VFP9.exe and also copies all of the other files of your VFP9 source directory. Thus, after installation you just rename the old VFP9 directory to something different, and rename the new directory to the original name, and all your Registrykeys and Links will work without interruption.
b) a new VFP10 err... VFPA compiler for 64 bit executables. Stil with some compatibility problems, and I'm not sure if I would ever need it, but: http://baiyujia.com/vfpadvanced/f_vfpa_gotovfpa64.asp
-----Ursprüngliche Nachricht----- Von: ProFox profox-bounces@leafe.com Im Auftrag von Vince Teachout Gesendet: Samstag, 23. November 2019 04:43 An: ProFox Email List profox@leafe.com Betreff: So, about this VFPA thing...
Apparently, I've been under a rock, and there's a magically enhanced VFP9 SP2 that fixes some bugs, can run concurrently with vfp9, and supports 64 bits.
Before I download something, am I on the right site: http://baiyujia.com/vfpadvanced/f_vfpa_about.asp ?
Thanks!
[excessive quoting removed by server]
_______________________________________________ Post Messages to: ProFox@leafe.com Subscription Maintenance: https://mail.leafe.com/mailman/listinfo/profox OT-free version of this list: https://mail.leafe.com/mailman/listinfo/profoxtech Searchable Archive: https://leafe.com/archives This message: https://leafe.com/archives/byMID/123c71a2-52d1-2365-2b1e-339bdb31f4b2@mbsoft... ** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious. Report [OT] Abuse: http://leafe.com/reportAbuse/123c71a2-52d1-2365-2b1e-339bdb31f4b2@mbsoftware...
It says SP2 right in the name?!?!?
I'll check VFP*.DLL across the machine to see what I find.
Thanks, Richard! --Mike
On 1/27/2020 3:41 PM, Richard Kaye wrote:
I think that's SP1?
You probably have the VFP DLLs from multiple versions scattered about your system. In particular, check the common files location buried under program files.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of MB Software Solutions, LLC Sent: Monday, January 27, 2020 3:39 PM To: profoxtech@leafe.com Subject: Re: So, about this VFPA thing...
This is strange. I downloaded this and ran it but VFP still says .2412. ??? https://github.com/VFPX/VFPRuntimeInstallers/blob/master/VFP9SP2RT.exe
On 1/27/2020 3:32 PM, Richard Kaye wrote:
Yes, you have to have the fully patched SP2 hotfix 3 version already installed on your system.
Check VFPX on Github for the hotfix installer. I'm pretty sure it got migrated there. If you still have problems, contact me off-list and I can send to you.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of MB Software Solutions, LLC Sent: Monday, January 27, 2020 3:20 PM To: profoxtech@leafe.com Subject: Re: So, about this VFPA thing...
So I got a new Win10 Pro laptop at the Corporate gig and installed VFP9 on it. It was NOT patched...so the version is Visual FoxPro 09.00.0000.2412 for Windows.
I downloaded the VFPA 32 bit from (a) below and when I go to run it, it fails with this error: https://www.screencast.com/t/XVR3hDpLXOB
I'm guessing that's because I've not patched the default installation to 9.0.0.7423?
Wanted to ask while I search for the VFP9SP2HotFix 3 installer. (I had tried one from wOOdy I thought but got a resource error earlier today...will try again now since I've uninstalled and reinstalled.)
tia, --Mike
On 11/23/2019 6:39 AM, Jürgen Wondzinski wrote:
Just to be clear: There are TWO versions of VFPA ("A" like the Hex notation of "10")
a) the patched version of your existing VFP9 installation. This implies that it's stil a 23Bit version. This is the version you most probably want to use immediately. Download the 32Bit on the bottom of: http://baiyujia.com/vfpadvanced/f_vfpa_about.asp It needs a current VFP9 installation with SP2, and then creates a new directory with a patched new VFP9.exe and also copies all of the other files of your VFP9 source directory. Thus, after installation you just rename the old VFP9 directory to something different, and rename the new directory to the original name, and all your Registrykeys and Links will work without interruption.
b) a new VFP10 err... VFPA compiler for 64 bit executables. Stil with some compatibility problems, and I'm not sure if I would ever need it, but: http://baiyujia.com/vfpadvanced/f_vfpa_gotovfpa64.asp
-----Ursprüngliche Nachricht----- Von: ProFox profox-bounces@leafe.com Im Auftrag von Vince Teachout Gesendet: Samstag, 23. November 2019 04:43 An: ProFox Email List profox@leafe.com Betreff: So, about this VFPA thing...
Apparently, I've been under a rock, and there's a magically enhanced VFP9 SP2 that fixes some bugs, can run concurrently with vfp9, and supports 64 bits.
Before I download something, am I on the right site: http://baiyujia.com/vfpadvanced/f_vfpa_about.asp ?
Thanks!
[excessive quoting removed by server]
I may not be remembering the actual version numbers for each SP. Go with what your eyes show you. 😊
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of MB Software Solutions, LLC Sent: Monday, January 27, 2020 3:46 PM To: profoxtech@leafe.com Subject: Re: So, about this VFPA thing...
It says SP2 right in the name?!?!?
I'll check VFP*.DLL across the machine to see what I find.
Thanks, Richard! --Mike
On 1/27/2020 3:41 PM, Richard Kaye wrote:
I think that's SP1?
You probably have the VFP DLLs from multiple versions scattered about your system. In particular, check the common files location buried under program files.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of MB Software Solutions, LLC Sent: Monday, January 27, 2020 3:39 PM To: profoxtech@leafe.com Subject: Re: So, about this VFPA thing...
This is strange. I downloaded this and ran it but VFP still says .2412. ??? https://github.com/VFPX/VFPRuntimeInstallers/blob/master/VFP9SP2RT.exe
On 1/27/2020 3:32 PM, Richard Kaye wrote:
Yes, you have to have the fully patched SP2 hotfix 3 version already installed on your system.
Check VFPX on Github for the hotfix installer. I'm pretty sure it got migrated there. If you still have problems, contact me off-list and I can send to you.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of MB Software Solutions, LLC Sent: Monday, January 27, 2020 3:20 PM To: profoxtech@leafe.com Subject: Re: So, about this VFPA thing...
So I got a new Win10 Pro laptop at the Corporate gig and installed VFP9 on it. It was NOT patched...so the version is Visual FoxPro 09.00.0000.2412 for Windows.
I downloaded the VFPA 32 bit from (a) below and when I go to run it, it fails with this error: https://www.screencast.com/t/XVR3hDpLXOB
I'm guessing that's because I've not patched the default installation to 9.0.0.7423?
Wanted to ask while I search for the VFP9SP2HotFix 3 installer. (I had tried one from wOOdy I thought but got a resource error earlier today...will try again now since I've uninstalled and reinstalled.)
tia, --Mike
On 11/23/2019 6:39 AM, Jürgen Wondzinski wrote:
Just to be clear: There are TWO versions of VFPA ("A" like the Hex notation of "10")
a) the patched version of your existing VFP9 installation. This implies that it's stil a 23Bit version. This is the version you most probably want to use immediately. Download the 32Bit on the bottom of: http://baiyujia.com/vfpadvanced/f_vfpa_about.asp It needs a current VFP9 installation with SP2, and then creates a new directory with a patched new VFP9.exe and also copies all of the other files of your VFP9 source directory. Thus, after installation you just rename the old VFP9 directory to something different, and rename the new directory to the original name, and all your Registrykeys and Links will work without interruption.
b) a new VFP10 err... VFPA compiler for 64 bit executables. Stil with some compatibility problems, and I'm not sure if I would ever need it, but: http://baiyujia.com/vfpadvanced/f_vfpa_gotovfpa64.asp
-----Ursprüngliche Nachricht----- Von: ProFox profox-bounces@leafe.com Im Auftrag von Vince Teachout Gesendet: Samstag, 23. November 2019 04:43 An: ProFox Email List profox@leafe.com Betreff: So, about this VFPA thing...
Apparently, I've been under a rock, and there's a magically enhanced VFP9 SP2 that fixes some bugs, can run concurrently with vfp9, and supports 64 bits.
Before I download something, am I on the right site: http://baiyujia.com/vfpadvanced/f_vfpa_about.asp ?
Thanks!
[excessive quoting removed by server]
_______________________________________________ Post Messages to: ProFox@leafe.com Subscription Maintenance: https://mail.leafe.com/mailman/listinfo/profox OT-free version of this list: https://mail.leafe.com/mailman/listinfo/profoxtech Searchable Archive: https://leafe.com/archives This message: https://leafe.com/archives/byMID/b2f57f77-880f-0a74-8a91-330904e6ae6e@mbsoft... ** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious. Report [OT] Abuse: http://leafe.com/reportAbuse/b2f57f77-880f-0a74-8a91-330904e6ae6e@mbsoftware...
Hi Mike,
a) THE VFPA thingy modifies the DEVELOPMENT version, and that one has to be on SP2.
b) The file you downloaded from github (VFP9SP2RT) is the RUNTIME installer, and of course does not touch your dev-system.
c) therefor you need the SP2 for VFP9 development, so that you at least get version 7423. This is done by downloading https://github.com/VFPX/VFP9SP2Hotfix3
d) I once wrote all about that stuff in my blog at http://woody-prolib.blogspot.com/ that's a step-by-step guide to install VFP9 on modern boxes.
wOOdy
-----Ursprüngliche Nachricht----- Von: ProFox profox-bounces@leafe.com Im Auftrag von MB Software Solutions, LLC Gesendet: Montag, 27. Januar 2020 21:20 An: profox@leafe.com Betreff: Re: So, about this VFPA thing...
So I got a new Win10 Pro laptop at the Corporate gig and installed VFP9 on it. It was NOT patched...so the version is Visual FoxPro 09.00.0000.2412 for Windows.
I downloaded the VFPA 32 bit from (a) below and when I go to run it, it fails with this error: https://www.screencast.com/t/XVR3hDpLXOB
I'm guessing that's because I've not patched the default installation to 9.0.0.7423?
Wanted to ask while I search for the VFP9SP2HotFix 3 installer. (I had tried one from wOOdy I thought but got a resource error earlier today...will try again now since I've uninstalled and reinstalled.)
tia, --Mike
On 11/23/2019 6:39 AM, Jürgen Wondzinski wrote:
Just to be clear: There are TWO versions of VFPA ("A" like the Hex notation of "10")
a) the patched version of your existing VFP9 installation. This implies that it's stil a 23Bit version. This is the version you most probably want to use immediately. Download the 32Bit on the bottom of: http://baiyujia.com/vfpadvanced/f_vfpa_about.asp It needs a current VFP9 installation with SP2, and then creates a new directory with a patched new VFP9.exe and also copies all of the other files of your VFP9 source directory. Thus, after installation you just rename the old VFP9 directory to something different, and rename the new directory to the original name, and all your Registrykeys and Links will work without interruption.
b) a new VFP10 err... VFPA compiler for 64 bit executables. Stil with some compatibility problems, and I'm not sure if I would ever need it, but: http://baiyujia.com/vfpadvanced/f_vfpa_gotovfpa64.asp
-----Ursprüngliche Nachricht----- Von: ProFox profox-bounces@leafe.com Im Auftrag von Vince Teachout Gesendet: Samstag, 23. November 2019 04:43 An: ProFox Email List profox@leafe.com Betreff: So, about this VFPA thing...
Apparently, I've been under a rock, and there's a magically enhanced VFP9 SP2 that fixes some bugs, can run concurrently with vfp9, and supports 64 bits.
Before I download something, am I on the right site: http://baiyujia.com/vfpadvanced/f_vfpa_about.asp ?
Thanks!
[excessive quoting removed by server]