I have just recently started to use FoxBin2Prg to store my VCX and SCX files as text versions in Git. Some of my forms have properties set to a have nothing in it. VFP displays this as "(none)".
When I use FoxBin2Prg to put this particular form in to the SC2 form, the back to the SCX form this property becomes a .F.
Just putting this out there for those that might use this tool.
Tracy
Further examination looks like this behavior might only be happening when the property name is "note". I see other properties on the same form that are not showing this behavior.
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Tracy Pearson Sent: Thursday, March 14, 2019 10:48 AM To: profoxtech@leafe.com Subject: FoxBin2Prg Form.Property = "" becomes .F.
I have just recently started to use FoxBin2Prg to store my VCX and SCX files as text versions in Git. Some of my forms have properties set to a have nothing in it. VFP displays this as "(none)".
When I use FoxBin2Prg to put this particular form in to the SC2 form, the back to the SCX form this property becomes a .F.
Just putting this out there for those that might use this tool.
Tracy
[excessive quoting removed by server]
Hi Tracy,
Finally, today I fixed all pending reported bugs. I'm not programming in VFP since late 2018, but today I was feel nostalgic and did it :)
Best regards!
Fernando.-
El jue., 14 mar. 2019 a las 15:51, Tracy Pearson (tracy@powerchurch.com) escribió:
Further examination looks like this behavior might only be happening when the property name is "note". I see other properties on the same form that are not showing this behavior.
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Tracy Pearson Sent: Thursday, March 14, 2019 10:48 AM To: profoxtech@leafe.com Subject: FoxBin2Prg Form.Property = "" becomes .F.
I have just recently started to use FoxBin2Prg to store my VCX and SCX files as text versions in Git. Some of my forms have properties set to a have nothing in it. VFP displays this as "(none)".
When I use FoxBin2Prg to put this particular form in to the SC2 form, the back to the SCX form this property becomes a .F.
Just putting this out there for those that might use this tool.
Tracy
[excessive quoting removed by server]
Hi Fernando,
Thank you.
Tracy
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Fernando D. Bozzo Sent: Wednesday, April 01, 2020 12:10 PM To: profoxtech@leafe.com Subject: Re: FoxBin2Prg Form.Property = "" becomes .F.
Hi Tracy,
Finally, today I fixed all pending reported bugs. I'm not programming in VFP since late 2018, but today I was feel nostalgic and did it :)
Best regards!
Fernando.-
El jue., 14 mar. 2019 a las 15:51, Tracy Pearson (tracy@powerchurch.com) escribió:
Further examination looks like this behavior might only be happening when the property name is "note". I see other properties on the same form that are not showing this behavior.
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Tracy Pearson Sent: Thursday, March 14, 2019 10:48 AM To: profoxtech@leafe.com Subject: FoxBin2Prg Form.Property = "" becomes .F.
I have just recently started to use FoxBin2Prg to store my VCX and SCX files as text versions in Git. Some of my forms have properties set to a have nothing in it. VFP displays this as "(none)".
When I use FoxBin2Prg to put this particular form in to the SC2 form, the back to the SCX form this property becomes a .F.
Just putting this out there for those that might use this tool.
Tracy
[excessive quoting removed by server]
Thanks, Fernando! Does that mean you also updated the version check to recognize VFPA? 😊
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Fernando D. Bozzo Sent: Wednesday, April 1, 2020 12:10 PM To: profoxtech@leafe.com Subject: Re: FoxBin2Prg Form.Property = "" becomes .F.
Hi Tracy,
Finally, today I fixed all pending reported bugs. I'm not programming in VFP since late 2018, but today I was feel nostalgic and did it :)
Best regards!
Fernando.-
El jue., 14 mar. 2019 a las 15:51, Tracy Pearson (tracy@powerchurch.com) escribió:
Further examination looks like this behavior might only be happening when the property name is "note". I see other properties on the same form that are not showing this behavior.
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Tracy Pearson Sent: Thursday, March 14, 2019 10:48 AM To: profoxtech@leafe.com Subject: FoxBin2Prg Form.Property = "" becomes .F.
I have just recently started to use FoxBin2Prg to store my VCX and SCX files as text versions in Git. Some of my forms have properties set to a have nothing in it. VFP displays this as "(none)".
When I use FoxBin2Prg to put this particular form in to the SC2 form, the back to the SCX form this property becomes a .F.
Just putting this out there for those that might use this tool.
Tracy
[excessive quoting removed by server]
_______________________________________________ Post Messages to: ProFox@leafe.com Subscription Maintenance: https://mail.leafe.com/mailman/listinfo/profox OT-free version of this list: https://mail.leafe.com/mailman/listinfo/profoxtech Searchable Archive: https://leafe.com/archives This message: https://leafe.com/archives/byMID/CAGQ_Juk5rf4ZqPBea3L=xZ3DQt0jZgd+XtCRxRTHA1... ** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious. Report [OT] Abuse: http://leafe.com/reportAbuse/CAGQ_Juk5rf4ZqPBea3L=xZ3DQt0jZgd+XtCRxRTHA17XnF...
On Thu, Mar 14, 2019 at 10:51 AM Tracy Pearson tracy@powerchurch.com wrote:
Further examination looks like this behavior might only be happening when the property name is "note". I see other properties on the same form that are not showing this behavior.
Note that "Note" is a FoxPro keyword and *might* cause problems in some obscure situations.
Obligatory reference: https://hackfox.github.io/section4/s4g155.html
Ted,
Thank you, Due to the FoxBin2Prg behavior that was changed away from Note. I was putting out a fire, since that problem went out to production and customers found it. I could have initialized the form property in the Init, but felt not using FoxPro keywords was a better choice.
Have a good one, Tracy
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Ted Roche Sent: Thursday, April 02, 2020 11:07 AM To: profoxtech@leafe.com Subject: Re: FoxBin2Prg Form.Property = "" becomes .F.
On Thu, Mar 14, 2019 at 10:51 AM Tracy Pearson tracy@powerchurch.com wrote:
Further examination looks like this behavior might only be happening when the property name is "note". I see other properties on the same form that are not showing this
behavior.
Note that "Note" is a FoxPro keyword and *might* cause problems in some obscure situations.
Obligatory reference: https://hackfox.github.io/section4/s4g155.html
Hi Tracy,
Did you write something into a ProjectHook? Care to share? I'd like to integrate FoxBin2PRG too in my framework. Just haven't gotten around to it.
tia, --Mike
On 3/14/2019 10:48 AM, Tracy Pearson wrote:
I have just recently started to use FoxBin2Prg to store my VCX and SCX files as text versions in Git. Some of my forms have properties set to a have nothing in it. VFP displays this as "(none)".
When I use FoxBin2Prg to put this particular form in to the SC2 form, the back to the SCX form this property becomes a .F.
Just putting this out there for those that might use this tool.
Tracy
[excessive quoting removed by server]
We are using Project Explorer available from VFPx. It uses FoxBin2Prg when saving a class or screen.
It can be used without Thor after a configuration file is to be edited.
Tracy
On March 14, 2019 9:49:03 PM EDT, "MB Software Solutions, LLC" mbsoftwaresolutions@mbsoftwaresolutions.com wrote:
Hi Tracy,
Did you write something into a ProjectHook? Care to share? I'd like to integrate FoxBin2PRG too in my framework. Just haven't gotten around to it.
tia, --Mike
On 3/14/2019 10:48 AM, Tracy Pearson wrote:
I have just recently started to use FoxBin2Prg to store my VCX and
SCX files
as text versions in Git. Some of my forms have properties set to a have nothing in it. VFP
displays
this as "(none)".
When I use FoxBin2Prg to put this particular form in to the SC2 form,
the
back to the SCX form this property becomes a .F.
Just putting this out there for those that might use this tool.
Tracy
[excessive quoting removed by server]
-
Fernando D. Bozzo -
MB Software Solutions, LLC -
Richard Kaye -
Ted Roche -
Tracy Pearson