Hi all
I have been happily using GoFish (4.3) for years but today when I tried to run it (in VFP9 SP2) the cursor changes to that circular one which appears when Fox is busy and GoFish refuses to load. Fox also displays eventually as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html ---
Use GF5? ๐
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul Newton Sent: Tuesday, April 28, 2020 9:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I tried to run it (in VFP9 SP2) the cursor changes to that circular one which appears when Fox is busy and GoFish refuses to load. Fox also displays eventually as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html ---
_______________________________________________ Post Messages to: ProFox@leafe.com Subscription Maintenance: https://mail.leafe.com/mailman/listinfo/profox OT-free version of this list: https://mail.leafe.com/mailman/listinfo/profoxtech Searchable Archive: https://leafe.com/archives This message: https://leafe.com/archives/byMID/SN1PR02MB374314793C0209A117317D42A1AC0@SN1P... ** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
Report [OT] Abuse: http://leafe.com/reportAbuse/SN1PR02MB374314793C0209A117317D42A1AC0@SN1PR02M...
Maybe - in the meantime the problem has resolved itself
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Richard Kaye Sent: 28 April 2020 14:40 To: profoxtech@leafe.com Subject: RE: GoFish problem
Sent by an external sender ------------------------------
Use GF5? ๐
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul Newton Sent: Tuesday, April 28, 2020 9:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I tried to run it (in VFP9 SP2) the cursor changes to that circular one which appears when Fox is busy and GoFish refuses to load. Fox also displays eventually as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html ---
_______________________________________________ Post Messages to: ProFox@leafe.com Subscription Maintenance: https://mail.leafe.com/mailman/listinfo/profox OT-free version of this list: https://mail.leafe.com/mailman/listinfo/profoxtech Searchable Archive: https://leafe.com/archives This message: https://leafe.com/archives/byMID/SN1PR02MB374314793C0209A117317D42A1AC0@SN1P... ** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
Report [OT] Abuse: http://leafe.com/reportAbuse/SN1PR02MB374314793C0209A117317D42A1AC0@SN1PR02M...
_______________________________________________ Post Messages to: ProFox@leafe.com Subscription Maintenance: https://mail.leafe.com/mailman/listinfo/profox OT-free version of this list: https://mail.leafe.com/mailman/listinfo/profoxtech Searchable Archive: https://leafe.com/archives This message: https://leafe.com/archives/byMID/MWHPR1001MB21445A5D98FF882F9FD2EA8CD2AC0@MW... ** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious. Report [OT] Abuse: http://leafe.com/reportAbuse/MWHPR1001MB21445A5D98FF882F9FD2EA8CD2AC0@MWHPR1...
I seem to recall there's a setting in GF to reload the last search on startup. And sometimes its metadata gets messed up. I kept running into weird issues with 4 that Jim could never duplicate. After I moved to 5 GF has been better behaved and in my experience it does run faster in 5 than 4.
--
rk
Richard Kaye Vice President, Auction House Systems
o 617 746 9838 fย 617 746 9801 invaluable.com
Please send your support queries to:
RFC Auction System Application Support - rfcsupport@invaluable.com RFC Website Application Support - rfcwebsupport@invaluable.com RFC Service Desk Account Access Requests - rfcaccountaccess@invaluable.com Sign on to our Service Desk
Invaluable The worldโs premier auctions and galleries
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul Newton Sent: Tuesday, April 28, 2020 9:49 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
Maybe - in the meantime the problem has resolved itself
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Richard Kaye Sent: 28 April 2020 14:40 To: profoxtech@leafe.com Subject: RE: GoFish problem
Sent by an external sender ------------------------------
Use GF5? ๐
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul Newton Sent: Tuesday, April 28, 2020 9:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I tried to run it (in VFP9 SP2) the cursor changes to that circular one which appears when Fox is busy and GoFish refuses to load. Fox also displays eventually as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html ---
_______________________________________________ Post Messages to: ProFox@leafe.com Subscription Maintenance: https://mail.leafe.com/mailman/listinfo/profox OT-free version of this list: https://mail.leafe.com/mailman/listinfo/profoxtech Searchable Archive: https://leafe.com/archives This message: https://leafe.com/archives/byMID/SN1PR02MB374314793C0209A117317D42A1AC0@SN1P... ** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
Report [OT] Abuse: http://leafe.com/reportAbuse/SN1PR02MB374314793C0209A117317D42A1AC0@SN1PR02M...
_______________________________________________ Post Messages to: ProFox@leafe.com Subscription Maintenance: https://mail.leafe.com/mailman/listinfo/profox OT-free version of this list: https://mail.leafe.com/mailman/listinfo/profoxtech Searchable Archive: https://leafe.com/archives This message: https://leafe.com/archives/byMID/MWHPR1001MB21445A5D98FF882F9FD2EA8CD2AC0@MW... ** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious. Report [OT] Abuse: http://leafe.com/reportAbuse/MWHPR1001MB21445A5D98FF882F9FD2EA8CD2AC0@MWHPR1... _______________________________________________ Post Messages to: ProFox@leafe.com Subscription Maintenance: https://mail.leafe.com/mailman/listinfo/profox OT-free version of this list: https://mail.leafe.com/mailman/listinfo/profoxtech Searchable Archive: https://leafe.com/archives This message: https://leafe.com/archives/byMID/SN1PR02MB3743263C7F3C641286F96CB3A1AC0@SN1P... ** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious. Report [OT] Abuse: http://leafe.com/reportAbuse/SN1PR02MB3743263C7F3C641286F96CB3A1AC0@SN1PR02M...
After you brought up GoFish, I found a video on it and thought I'd try to use it, but I can't get v5 to run. I keep getting an OLE error code that a class is not registered. If I click ok on the error the source stops on a reference to 'otree'. I cannot find any instructions to setup it up or any pre-requisites as far as .ocx files that I need to have for it run. I'd like to try it, but so far no go. (Also, I couldn't find a download for the 4.3 version, so got stuck there too.)
Any ideas?
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Paul Newton Sent: Tuesday, April 28, 2020 8:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I tried to run it (in VFP9 SP2) the cursor changes to that circular one which appears when Fox is busy and GoFish refuses to load. Fox also displays eventually as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html ---
[excessive quoting removed by server]
IIRC it uses MS common controls circa VB6 so you might need to hunt down something like that.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul H. Tarver Sent: Tuesday, April 28, 2020 11:05 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
After you brought up GoFish, I found a video on it and thought I'd try to use it, but I can't get v5 to run. I keep getting an OLE error code that a class is not registered. If I click ok on the error the source stops on a reference to 'otree'. I cannot find any instructions to setup it up or any pre-requisites as far as .ocx files that I need to have for it run. I'd like to try it, but so far no go. (Also, I couldn't find a download for the 4.3 version, so got stuck there too.)
Any ideas?
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Paul Newton Sent: Tuesday, April 28, 2020 8:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I tried to run it (in VFP9 SP2) the cursor changes to that circular one which appears when Fox is busy and GoFish refuses to load. Fox also displays eventually as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html ---
[excessive quoting removed by server]
There is/was a Google group for GF. I'd try searching that for clues.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Richard Kaye Sent: Tuesday, April 28, 2020 1:38 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC it uses MS common controls circa VB6 so you might need to hunt down something like that.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul H. Tarver Sent: Tuesday, April 28, 2020 11:05 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
After you brought up GoFish, I found a video on it and thought I'd try to use it, but I can't get v5 to run. I keep getting an OLE error code that a class is not registered. If I click ok on the error the source stops on a reference to 'otree'. I cannot find any instructions to setup it up or any pre-requisites as far as .ocx files that I need to have for it run. I'd like to try it, but so far no go. (Also, I couldn't find a download for the 4.3 version, so got stuck there too.)
Any ideas?
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Paul Newton Sent: Tuesday, April 28, 2020 8:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I tried to run it (in VFP9 SP2) the cursor changes to that circular one which appears when Fox is busy and GoFish refuses to load. Fox also displays eventually as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html ---
[excessive quoting removed by server]
https://groups.google.com/forum/?fromgroups#!forum/foxprogofish
Op di 28 apr. 2020 om 21:08 schreef Richard Kaye rkaye@invaluable.com:
There is/was a Google group for GF. I'd try searching that for clues.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Richard Kaye Sent: Tuesday, April 28, 2020 1:38 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC it uses MS common controls circa VB6 so you might need to hunt down something like that.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul H. Tarver Sent: Tuesday, April 28, 2020 11:05 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
After you brought up GoFish, I found a video on it and thought I'd try to use it, but I can't get v5 to run. I keep getting an OLE error code that a class is not registered. If I click ok on the error the source stops on a reference to 'otree'. I cannot find any instructions to setup it up or any pre-requisites as far as .ocx files that I need to have for it run. I'd like to try it, but so far no go. (Also, I couldn't find a download for the 4.3 version, so got stuck there too.)
Any ideas?
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Paul Newton Sent: Tuesday, April 28, 2020 8:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I tried to run it (in VFP9 SP2) the cursor changes to that circular one which appears when Fox is busy and GoFish refuses to load. Fox also displays eventually as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html
[excessive quoting removed by server]
Been there, done that. No joy in Mudville so far.
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Richard Kaye Sent: Tuesday, April 28, 2020 2:08 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
There is/was a Google group for GF. I'd try searching that for clues.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Richard Kaye Sent: Tuesday, April 28, 2020 1:38 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC it uses MS common controls circa VB6 so you might need to hunt down something like that.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul H. Tarver Sent: Tuesday, April 28, 2020 11:05 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
After you brought up GoFish, I found a video on it and thought I'd try to use it, but I can't get v5 to run. I keep getting an OLE error code that a class is not registered. If I click ok on the error the source stops on a reference to 'otree'. I cannot find any instructions to setup it up or any pre-requisites as far as .ocx files that I need to have for it run. I'd like to try it, but so far no go. (Also, I couldn't find a download for the 4.3 version, so got stuck there too.)
Any ideas?
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Paul Newton Sent: Tuesday, April 28, 2020 8:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I tried to run it (in VFP9 SP2) the cursor changes to that circular one which appears when Fox is busy and GoFish refuses to load. Fox also displays eventually as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html ---
[excessive quoting removed by server]
It looks like the Microsoft Visual Basic 6.0 Common Controls download only updated my existing MSComCt files and didn't appear to install anything else and my OLE error remains.
So I'm guessing it's something in a different distribution.
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Richard Kaye Sent: Tuesday, April 28, 2020 12:38 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC it uses MS common controls circa VB6 so you might need to hunt down something like that.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul H. Tarver Sent: Tuesday, April 28, 2020 11:05 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
After you brought up GoFish, I found a video on it and thought I'd try to use it, but I can't get v5 to run. I keep getting an OLE error code that a class is not registered. If I click ok on the error the source stops on a reference to 'otree'. I cannot find any instructions to setup it up or any pre-requisites as far as .ocx files that I need to have for it run. I'd like to try it, but so far no go. (Also, I couldn't find a download for the 4.3 version, so got stuck there too.)
Any ideas?
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Paul Newton Sent: Tuesday, April 28, 2020 8:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I tried to run it (in VFP9 SP2) the cursor changes to that circular one which appears when Fox is busy and GoFish refuses to load. Fox also displays eventually as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html ---
[excessive quoting removed by server]
We had enough problems with the Common controls we removed them from our product. Try to open a screen in our software and Windows attempting to run an installer. The file was there, and registered, but the installer insisted it was the wrong one. You are looking for one these files. I don't know which version was attached to the form: Microsoft Windows Common Controls 5.0 (SP2) File: c:\windows\syswow64\comctl32.ocx Microsoft Windows Common Controls 6.0 (SP6) File: c:\windows\syswow64\mscomctl.ocx
If you are on a Windows 10 64-bit OS, that is where they live. I don't use GF personally.
HTH, Tracy
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Paul H. Tarver Sent: Tuesday, April 28, 2020 4:09 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
It looks like the Microsoft Visual Basic 6.0 Common Controls download only updated my existing MSComCt files and didn't appear to install anything else and my OLE error remains.
So I'm guessing it's something in a different distribution.
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Richard Kaye Sent: Tuesday, April 28, 2020 12:38 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC it uses MS common controls circa VB6 so you might need to hunt down something like that.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul H. Tarver Sent: Tuesday, April 28, 2020 11:05 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
After you brought up GoFish, I found a video on it and thought I'd try to use it, but I can't get v5 to run. I keep getting an OLE error code that a class is not registered. If I click ok on the error the source stops on a reference to 'otree'. I cannot find any instructions to setup it up or any pre-requisites as far as .ocx files that I need to have for it run. I'd like to try it, but so far no go. (Also, I couldn't find a download for the 4.3 version, so got stuck there too.)
Any ideas?
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Paul Newton Sent: Tuesday, April 28, 2020 8:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I tried to run it (in VFP9 SP2) the cursor changes to that circular one which appears when Fox is busy and GoFish refuses to load. Fox also displays eventually as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html ---
[excessive quoting removed by server]
Here is what GoFish uses:
OLEObject = C:\Windows\SysWOW64\MSCOMCTL.OCX
- Matt Slay
On 4/28/2020 3:43 PM, Tracy Pearson wrote:
We had enough problems with the Common controls we removed them from our product. Try to open a screen in our software and Windows attempting to run an installer. The file was there, and registered, but the installer insisted it was the wrong one. You are looking for one these files. I don't know which version was attached to the form: Microsoft Windows Common Controls 5.0 (SP2) File: c:\windows\syswow64\comctl32.ocx Microsoft Windows Common Controls 6.0 (SP6) File: c:\windows\syswow64\mscomctl.ocx
If you are on a Windows 10 64-bit OS, that is where they live. I don't use GF personally.
HTH, Tracy
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Paul H. Tarver Sent: Tuesday, April 28, 2020 4:09 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
It looks like the Microsoft Visual Basic 6.0 Common Controls download only updated my existing MSComCt files and didn't appear to install anything else and my OLE error remains.
So I'm guessing it's something in a different distribution.
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Richard Kaye Sent: Tuesday, April 28, 2020 12:38 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC it uses MS common controls circa VB6 so you might need to hunt down something like that.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul H. Tarver Sent: Tuesday, April 28, 2020 11:05 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
After you brought up GoFish, I found a video on it and thought I'd try to use it, but I can't get v5 to run. I keep getting an OLE error code that a class is not registered. If I click ok on the error the source stops on a reference to 'otree'. I cannot find any instructions to setup it up or any pre-requisites as far as .ocx files that I need to have for it run. I'd like to try it, but so far no go. (Also, I couldn't find a download for the 4.3 version, so got stuck there too.)
Any ideas?
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Paul Newton Sent: Tuesday, April 28, 2020 8:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I tried to run it (in VFP9 SP2) the cursor changes to that circular one which appears when Fox is busy and GoFish refuses to load. Fox also displays eventually as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html
[excessive quoting removed by server]
We should (collectively) update GoFish because it doesn't work in VFP10 64 bit yet either because of these controls.
E
On Tue, Apr 28, 2020 at 4:18 PM Matt Slay mattslay@jordanmachine.com wrote:
Here is what GoFish uses:
OLEObject = C:\Windows\SysWOW64\MSCOMCTL.OCX
- Matt Slay
On 4/28/2020 3:43 PM, Tracy Pearson wrote:
We had enough problems with the Common controls we removed them from our product. Try to open a screen in our software and Windows attempting to run an installer. The file was there, and registered, but the installer
insisted it
was the wrong one. You are looking for one these files. I don't know which version was
attached
to the form: Microsoft Windows Common Controls 5.0 (SP2) File: c:\windows\syswow64\comctl32.ocx Microsoft Windows Common Controls 6.0 (SP6) File: c:\windows\syswow64\mscomctl.ocx
If you are on a Windows 10 64-bit OS, that is where they live. I don't use GF personally.
HTH, Tracy
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Paul H.
Tarver Sent: Tuesday, April 28, 2020 4:09 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
It looks like the Microsoft Visual Basic 6.0 Common Controls download
only
updated my existing MSComCt files and didn't appear to install anything
else
and my OLE error remains.
So I'm guessing it's something in a different distribution.
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Richard
Kaye Sent: Tuesday, April 28, 2020 12:38 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC it uses MS common controls circa VB6 so you might need to hunt down something like that.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul H.
Tarver
Sent: Tuesday, April 28, 2020 11:05 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
After you brought up GoFish, I found a video on it and thought I'd try to use it, but I can't get v5 to run. I keep getting an OLE error code that
a
class is not registered. If I click ok on the error the source stops on a reference to 'otree'. I cannot find any instructions to setup it up or
any
pre-requisites as far as .ocx files that I need to have for it run. I'd
like
to try it, but so far no go. (Also, I couldn't find a download for the
4.3
version, so got stuck there too.)
Any ideas?
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Paul Newton Sent: Tuesday, April 28, 2020 8:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I tried
to
run it (in VFP9 SP2) the cursor changes to that circular one which
appears
when Fox is busy and GoFish refuses to load. Fox also displays
eventually
as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html
[excessive quoting removed by server]
Eric - what UI control would be used in a VFP in place of the current OCX Treeview?
Matt Slay
On Apr 28, 2020, at 5:41 PM, Eric Selje Eric@saltydogllc.com wrote:
๏ปฟWe should (collectively) update GoFish because it doesn't work in VFP10 64 bit yet either because of these controls.
E
On Tue, Apr 28, 2020 at 4:18 PM Matt Slay mattslay@jordanmachine.com wrote:
Here is what GoFish uses:
OLEObject = C:\Windows\SysWOW64\MSCOMCTL.OCX
- Matt Slay
On 4/28/2020 3:43 PM, Tracy Pearson wrote: We had enough problems with the Common controls we removed them from our product. Try to open a screen in our software and Windows attempting to run an installer. The file was there, and registered, but the installer
insisted it
was the wrong one. You are looking for one these files. I don't know which version was
attached
to the form: Microsoft Windows Common Controls 5.0 (SP2) File: c:\windows\syswow64\comctl32.ocx Microsoft Windows Common Controls 6.0 (SP6) File: c:\windows\syswow64\mscomctl.ocx
If you are on a Windows 10 64-bit OS, that is where they live. I don't use GF personally.
HTH, Tracy
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Paul H.
Tarver Sent: Tuesday, April 28, 2020 4:09 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
It looks like the Microsoft Visual Basic 6.0 Common Controls download
only
updated my existing MSComCt files and didn't appear to install anything
else
and my OLE error remains.
So I'm guessing it's something in a different distribution.
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Richard
Kaye Sent: Tuesday, April 28, 2020 12:38 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC it uses MS common controls circa VB6 so you might need to hunt down something like that.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul H.
Tarver
Sent: Tuesday, April 28, 2020 11:05 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
After you brought up GoFish, I found a video on it and thought I'd try to use it, but I can't get v5 to run. I keep getting an OLE error code that
a
class is not registered. If I click ok on the error the source stops on a reference to 'otree'. I cannot find any instructions to setup it up or
any
pre-requisites as far as .ocx files that I need to have for it run. I'd
like
to try it, but so far no go. (Also, I couldn't find a download for the
4.3
version, so got stuck there too.)
Any ideas?
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Paul Newton Sent: Tuesday, April 28, 2020 8:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I tried
to
run it (in VFP9 SP2) the cursor changes to that circular one which
appears
when Fox is busy and GoFish refuses to load. Fox also displays
eventually
as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html
[excessive quoting removed by server]
DBi makes some great controls. :) They can be distributed runtime for free but anyone who wants to work on GoFish would need a dev license for them.
E
On Tue, Apr 28, 2020 at 6:36 PM Matt Slay mattslay@jordanmachine.com wrote:
Eric - what UI control would be used in a VFP in place of the current OCX Treeview?
Matt Slay
On Apr 28, 2020, at 5:41 PM, Eric Selje Eric@saltydogllc.com wrote:
๏ปฟWe should (collectively) update GoFish because it doesn't work in VFP10
64
bit yet either because of these controls.
E
On Tue, Apr 28, 2020 at 4:18 PM Matt Slay mattslay@jordanmachine.com wrote:
Here is what GoFish uses:
OLEObject = C:\Windows\SysWOW64\MSCOMCTL.OCX
- Matt Slay
On 4/28/2020 3:43 PM, Tracy Pearson wrote: We had enough problems with the Common controls we removed them from
our
product. Try to open a screen in our software and Windows attempting to run an installer. The file was there, and registered, but the installer
insisted it
was the wrong one. You are looking for one these files. I don't know which version was
attached
to the form: Microsoft Windows Common Controls 5.0 (SP2) File: c:\windows\syswow64\comctl32.ocx Microsoft Windows Common Controls 6.0 (SP6) File: c:\windows\syswow64\mscomctl.ocx
If you are on a Windows 10 64-bit OS, that is where they live. I don't use GF personally.
HTH, Tracy
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Paul H.
Tarver Sent: Tuesday, April 28, 2020 4:09 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
It looks like the Microsoft Visual Basic 6.0 Common Controls download
only
updated my existing MSComCt files and didn't appear to install anything
else
and my OLE error remains.
So I'm guessing it's something in a different distribution.
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Richard
Kaye Sent: Tuesday, April 28, 2020 12:38 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC it uses MS common controls circa VB6 so you might need to hunt
down
something like that.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul H.
Tarver
Sent: Tuesday, April 28, 2020 11:05 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
After you brought up GoFish, I found a video on it and thought I'd try
to
use it, but I can't get v5 to run. I keep getting an OLE error code
that
a
class is not registered. If I click ok on the error the source stops
on a
reference to 'otree'. I cannot find any instructions to setup it up or
any
pre-requisites as far as .ocx files that I need to have for it run. I'd
like
to try it, but so far no go. (Also, I couldn't find a download for the
4.3
version, so got stuck there too.)
Any ideas?
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Paul
Newton Sent: Tuesday, April 28, 2020 8:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I tried
to
run it (in VFP9 SP2) the cursor changes to that circular one which
appears
when Fox is busy and GoFish refuses to load. Fox also displays
eventually
as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html
[excessive quoting removed by server]
Are you sure? I believe GF is to be distributed f.o.c where DBI you have to pay Koen
Op wo 29 apr. 2020 om 04:18 schreef Eric Selje Eric@saltydogllc.com
DBi makes some great controls. :) They can be distributed runtime for free but anyone who wants to work on GoFish would need a dev license for them.
E
On Tue, Apr 28, 2020 at 6:36 PM Matt Slay mattslay@jordanmachine.com wrote:
Eric - what UI control would be used in a VFP in place of the current OCX Treeview?
Matt Slay
On Apr 28, 2020, at 5:41 PM, Eric Selje Eric@saltydogllc.com wrote:
๏ปฟWe should (collectively) update GoFish because it doesn't work in
VFP10
64
bit yet either because of these controls.
E
On Tue, Apr 28, 2020 at 4:18 PM Matt Slay <mattslay@jordanmachine.com
wrote:
Here is what GoFish uses:
OLEObject = C:\Windows\SysWOW64\MSCOMCTL.OCX
- Matt Slay
On 4/28/2020 3:43 PM, Tracy Pearson wrote: We had enough problems with the Common controls we removed them from
our
product. Try to open a screen in our software and Windows attempting to run an installer. The file was there, and registered, but the installer
insisted it
was the wrong one. You are looking for one these files. I don't know which version was
attached
to the form: Microsoft Windows Common Controls 5.0 (SP2) File: c:\windows\syswow64\comctl32.ocx Microsoft Windows Common Controls 6.0 (SP6) File: c:\windows\syswow64\mscomctl.ocx
If you are on a Windows 10 64-bit OS, that is where they live. I don't use GF personally.
HTH, Tracy
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Paul H.
Tarver Sent: Tuesday, April 28, 2020 4:09 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
It looks like the Microsoft Visual Basic 6.0 Common Controls download
only
updated my existing MSComCt files and didn't appear to install
anything
else
and my OLE error remains.
So I'm guessing it's something in a different distribution.
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Richard
Kaye Sent: Tuesday, April 28, 2020 12:38 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC it uses MS common controls circa VB6 so you might need to hunt
down
something like that.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul H.
Tarver
Sent: Tuesday, April 28, 2020 11:05 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
After you brought up GoFish, I found a video on it and thought I'd
try
to
use it, but I can't get v5 to run. I keep getting an OLE error code
that
a
class is not registered. If I click ok on the error the source stops
on a
reference to 'otree'. I cannot find any instructions to setup it up
or
any
pre-requisites as far as .ocx files that I need to have for it run.
I'd
like
to try it, but so far no go. (Also, I couldn't find a download for
the
4.3
version, so got stuck there too.)
Any ideas?
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Paul
Newton Sent: Tuesday, April 28, 2020 8:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I
tried
to
run it (in VFP9 SP2) the cursor changes to that circular one which
appears
when Fox is busy and GoFish refuses to load. Fox also displays
eventually
as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept) text/html
[excessive quoting removed by server]
On Wed, 29 Apr 2020, at 8:34 AM, Koen Piller wrote:
Are you sure? I believe GF is to be distributed f.o.c where DBI you have to pay
You can redistribute DBI Controls with your built COM-compatible application (VFP, VB6 etc). If you supply the source to your application, and a form uses a DBI Control, you can't open that form without the DBI Control being licenced. Or rather you can open it, but you'll get an error and the DBI Control won't be shown.
Never used it but rendered this:
https://www.foxite.com/archives/html-treeview-in-vfp-0000450232.htm
On 28 April 2020 19:36:45 GMT-04:00, Matt Slay mattslay@jordanmachine.com wrote:
Eric - what UI control would be used in a VFP in place of the current OCX Treeview?
Matt Slay
On Apr 28, 2020, at 5:41 PM, Eric Selje Eric@saltydogllc.com wrote:
๏ปฟWe should (collectively) update GoFish because it doesn't work in
VFP10 64
bit yet either because of these controls.
E
On Tue, Apr 28, 2020 at 4:18 PM Matt Slay
wrote:
Here is what GoFish uses:
OLEObject = C:\Windows\SysWOW64\MSCOMCTL.OCX
- Matt Slay
On 4/28/2020 3:43 PM, Tracy Pearson wrote: We had enough problems with the Common controls we removed them
from our
product. Try to open a screen in our software and Windows attempting to run
an
installer. The file was there, and registered, but the installer
insisted it
was the wrong one. You are looking for one these files. I don't know which version was
attached
to the form: Microsoft Windows Common Controls 5.0 (SP2) File: c:\windows\syswow64\comctl32.ocx Microsoft Windows Common Controls 6.0 (SP6) File: c:\windows\syswow64\mscomctl.ocx
If you are on a Windows 10 64-bit OS, that is where they live. I don't use GF personally.
HTH, Tracy
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Paul H.
Tarver Sent: Tuesday, April 28, 2020 4:09 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
It looks like the Microsoft Visual Basic 6.0 Common Controls
download
only
updated my existing MSComCt files and didn't appear to install
anything
else
and my OLE error remains.
So I'm guessing it's something in a different distribution.
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Richard
Kaye Sent: Tuesday, April 28, 2020 12:38 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC it uses MS common controls circa VB6 so you might need to hunt
down
something like that.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul
H.
Tarver
Sent: Tuesday, April 28, 2020 11:05 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
After you brought up GoFish, I found a video on it and thought I'd
try to
use it, but I can't get v5 to run. I keep getting an OLE error code
that
a
class is not registered. If I click ok on the error the source
stops on a
reference to 'otree'. I cannot find any instructions to setup it up
or
any
pre-requisites as far as .ocx files that I need to have for it run.
I'd
like
to try it, but so far no go. (Also, I couldn't find a download for
the
4.3
version, so got stuck there too.)
Any ideas?
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Paul
Newton Sent: Tuesday, April 28, 2020 8:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I
tried
to
run it (in VFP9 SP2) the cursor changes to that circular one which
appears
when Fox is busy and GoFish refuses to load. Fox also displays
eventually
as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept) text/html
[excessive quoting removed by server]
IIRC Doug Hennig has done an awful of work with treeviews and released pure VFP based classes and many whitepapers about using them.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Frank Cazabon Sent: Tuesday, April 28, 2020 10:28 PM To: profoxtech@leafe.com Subject: Re: GoFish problem
Never used it but rendered this:
https://www.foxite.com/archives/html-treeview-in-vfp-0000450232.htm
On 28 April 2020 19:36:45 GMT-04:00, Matt Slay mattslay@jordanmachine.com wrote:
Eric - what UI control would be used in a VFP in place of the current OCX Treeview?
Matt Slay
On Apr 28, 2020, at 5:41 PM, Eric Selje Eric@saltydogllc.com wrote:
๏ปฟWe should (collectively) update GoFish because it doesn't work in
VFP10 64
bit yet either because of these controls.
E
On Tue, Apr 28, 2020 at 4:18 PM Matt Slay
wrote:
Here is what GoFish uses:
OLEObject = C:\Windows\SysWOW64\MSCOMCTL.OCX
- Matt Slay
On 4/28/2020 3:43 PM, Tracy Pearson wrote: We had enough problems with the Common controls we removed them
from our
product. Try to open a screen in our software and Windows attempting to run
an
installer. The file was there, and registered, but the installer
insisted it
was the wrong one. You are looking for one these files. I don't know which version was
attached
to the form: Microsoft Windows Common Controls 5.0 (SP2) File: c:\windows\syswow64\comctl32.ocx Microsoft Windows Common Controls 6.0 (SP6) File: c:\windows\syswow64\mscomctl.ocx
If you are on a Windows 10 64-bit OS, that is where they live. I don't use GF personally.
HTH, Tracy
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Paul H.
Tarver Sent: Tuesday, April 28, 2020 4:09 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
It looks like the Microsoft Visual Basic 6.0 Common Controls
download
only
updated my existing MSComCt files and didn't appear to install
anything
else
and my OLE error remains.
So I'm guessing it's something in a different distribution.
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Richard
Kaye Sent: Tuesday, April 28, 2020 12:38 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC it uses MS common controls circa VB6 so you might need to hunt
down
something like that.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul
H.
Tarver
Sent: Tuesday, April 28, 2020 11:05 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
After you brought up GoFish, I found a video on it and thought I'd
try to
use it, but I can't get v5 to run. I keep getting an OLE error code
that
a
class is not registered. If I click ok on the error the source
stops on a
reference to 'otree'. I cannot find any instructions to setup it up
or
any
pre-requisites as far as .ocx files that I need to have for it run.
I'd
like
to try it, but so far no go. (Also, I couldn't find a download for
the
4.3
version, so got stuck there too.)
Any ideas?
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Paul
Newton Sent: Tuesday, April 28, 2020 8:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I
tried
to
run it (in VFP9 SP2) the cursor changes to that circular one which
appears
when Fox is busy and GoFish refuses to load. Fox also displays
eventually
as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept) text/html
[excessive quoting removed by server]
_______________________________________________ Post Messages to: ProFox@leafe.com Subscription Maintenance: https://mail.leafe.com/mailman/listinfo/profox OT-free version of this list: https://mail.leafe.com/mailman/listinfo/profoxtech Searchable Archive: https://leafe.com/archives This message: https://leafe.com/archives/byMID/3CEA140D-42FC-443E-9FA3-5136E6269177@gmail.... ** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious. Report [OT] Abuse: http://leafe.com/reportAbuse/3CEA140D-42FC-443E-9FA3-5136E6269177@gmail.com
Are you saying his work was awful or that he did a lot of work? <grin>
Tracy
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Richard Kaye Sent: Wednesday, April 29, 2020 11:10 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC Doug Hennig has done an awful of work with treeviews and released pure VFP based classes and many whitepapers about using them.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Frank Cazabon Sent: Tuesday, April 28, 2020 10:28 PM To: profoxtech@leafe.com Subject: Re: GoFish problem
Never used it but rendered this:
https://www.foxite.com/archives/html-treeview-in-vfp-0000450232.htm
On 28 April 2020 19:36:45 GMT-04:00, Matt Slay mattslay@jordanmachine.com wrote:
Eric - what UI control would be used in a VFP in place of the current OCX Treeview?
Matt Slay
On Apr 28, 2020, at 5:41 PM, Eric Selje Eric@saltydogllc.com wrote:
๏ปฟWe should (collectively) update GoFish because it doesn't work in
VFP10 64
bit yet either because of these controls.
E
On Tue, Apr 28, 2020 at 4:18 PM Matt Slay
wrote:
Here is what GoFish uses:
OLEObject = C:\Windows\SysWOW64\MSCOMCTL.OCX
- Matt Slay
On 4/28/2020 3:43 PM, Tracy Pearson wrote: We had enough problems with the Common controls we removed them
from our
product. Try to open a screen in our software and Windows attempting to run
an
installer. The file was there, and registered, but the installer
insisted it
was the wrong one. You are looking for one these files. I don't know which version was
attached
to the form: Microsoft Windows Common Controls 5.0 (SP2) File: c:\windows\syswow64\comctl32.ocx Microsoft Windows Common Controls 6.0 (SP6) File: c:\windows\syswow64\mscomctl.ocx
If you are on a Windows 10 64-bit OS, that is where they live. I don't use GF personally.
HTH, Tracy
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Paul H.
Tarver Sent: Tuesday, April 28, 2020 4:09 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
It looks like the Microsoft Visual Basic 6.0 Common Controls
download
only
updated my existing MSComCt files and didn't appear to install
anything
else
and my OLE error remains.
So I'm guessing it's something in a different distribution.
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Richard
Kaye Sent: Tuesday, April 28, 2020 12:38 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC it uses MS common controls circa VB6 so you might need to hunt
down
something like that.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul
H.
Tarver
Sent: Tuesday, April 28, 2020 11:05 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
After you brought up GoFish, I found a video on it and thought I'd
try to
use it, but I can't get v5 to run. I keep getting an OLE error code
that
a
class is not registered. If I click ok on the error the source
stops on a
reference to 'otree'. I cannot find any instructions to setup it up
or
any
pre-requisites as far as .ocx files that I need to have for it run.
I'd
like
to try it, but so far no go. (Also, I couldn't find a download for
the
4.3
version, so got stuck there too.)
Any ideas?
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Paul
Newton Sent: Tuesday, April 28, 2020 8:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I
tried
to
run it (in VFP9 SP2) the cursor changes to that circular one which
appears
when Fox is busy and GoFish refuses to load. Fox also displays
eventually
as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept) text/html
[excessive quoting removed by server]
I knew I should have written "tremendous"... ๐
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Tracy Pearson Sent: Wednesday, April 29, 2020 11:20 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
Are you saying his work was awful or that he did a lot of work? <grin>
Tracy
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Richard Kaye Sent: Wednesday, April 29, 2020 11:10 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC Doug Hennig has done an awful of work with treeviews and released pure VFP based classes and many whitepapers about using them.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Frank Cazabon Sent: Tuesday, April 28, 2020 10:28 PM To: profoxtech@leafe.com Subject: Re: GoFish problem
Never used it but rendered this:
https://www.foxite.com/archives/html-treeview-in-vfp-0000450232.htm
On 28 April 2020 19:36:45 GMT-04:00, Matt Slay mattslay@jordanmachine.com wrote:
Eric - what UI control would be used in a VFP in place of the current OCX Treeview?
Matt Slay
On Apr 28, 2020, at 5:41 PM, Eric Selje Eric@saltydogllc.com wrote:
๏ปฟWe should (collectively) update GoFish because it doesn't work in
VFP10 64
bit yet either because of these controls.
E
On Tue, Apr 28, 2020 at 4:18 PM Matt Slay
wrote:
Here is what GoFish uses:
OLEObject = C:\Windows\SysWOW64\MSCOMCTL.OCX
- Matt Slay
On 4/28/2020 3:43 PM, Tracy Pearson wrote: We had enough problems with the Common controls we removed them
from our
product. Try to open a screen in our software and Windows attempting to run
an
installer. The file was there, and registered, but the installer
insisted it
was the wrong one. You are looking for one these files. I don't know which version was
attached
to the form: Microsoft Windows Common Controls 5.0 (SP2) File: c:\windows\syswow64\comctl32.ocx Microsoft Windows Common Controls 6.0 (SP6) File: c:\windows\syswow64\mscomctl.ocx
If you are on a Windows 10 64-bit OS, that is where they live. I don't use GF personally.
HTH, Tracy
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Paul H.
Tarver Sent: Tuesday, April 28, 2020 4:09 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
It looks like the Microsoft Visual Basic 6.0 Common Controls
download
only
updated my existing MSComCt files and didn't appear to install
anything
else
and my OLE error remains.
So I'm guessing it's something in a different distribution.
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Richard
Kaye Sent: Tuesday, April 28, 2020 12:38 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC it uses MS common controls circa VB6 so you might need to hunt
down
something like that.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul
H.
Tarver
Sent: Tuesday, April 28, 2020 11:05 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
After you brought up GoFish, I found a video on it and thought I'd
try to
use it, but I can't get v5 to run. I keep getting an OLE error code
that
a
class is not registered. If I click ok on the error the source
stops on a
reference to 'otree'. I cannot find any instructions to setup it up
or
any
pre-requisites as far as .ocx files that I need to have for it run.
I'd
like
to try it, but so far no go. (Also, I couldn't find a download for
the
4.3
version, so got stuck there too.)
Any ideas?
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Paul
Newton Sent: Tuesday, April 28, 2020 8:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I
tried
to
run it (in VFP9 SP2) the cursor changes to that circular one which
appears
when Fox is busy and GoFish refuses to load. Fox also displays
eventually
as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept) text/html
[excessive quoting removed by server]
_______________________________________________ Post Messages to: ProFox@leafe.com Subscription Maintenance: https://mail.leafe.com/mailman/listinfo/profox OT-free version of this list: https://mail.leafe.com/mailman/listinfo/profoxtech Searchable Archive: https://leafe.com/archives This message: https://leafe.com/archives/byMID/000001d61e39$a1d6daf0$e58490d0$@powerchurch... ** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious. Report [OT] Abuse: http://leafe.com/reportAbuse/000001d61e39$a1d6daf0$e58490d0$@powerchurch.com
No - awful is correct! The amount of work Doug has done is enough to fill anyone with awe ๐
John Weller 01380 723235 07976 393631
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Richard Kaye Sent: 29 April 2020 16:31 To: profoxtech@leafe.com Subject: RE: GoFish problem
I knew I should have written "tremendous"... ๐
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Tracy Pearson Sent: Wednesday, April 29, 2020 11:20 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
Are you saying his work was awful or that he did a lot of work? <grin>
Tracy
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Richard Kaye Sent: Wednesday, April 29, 2020 11:10 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC Doug Hennig has done an awful of work with treeviews and released pure VFP based classes and many whitepapers about using them.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Frank Cazabon Sent: Tuesday, April 28, 2020 10:28 PM To: profoxtech@leafe.com Subject: Re: GoFish problem
Never used it but rendered this:
https://www.foxite.com/archives/html-treeview-in-vfp-0000450232.htm
On 28 April 2020 19:36:45 GMT-04:00, Matt Slay mattslay@jordanmachine.com wrote:
Eric - what UI control would be used in a VFP in place of the current OCX Treeview?
Matt Slay
On Apr 28, 2020, at 5:41 PM, Eric Selje Eric@saltydogllc.com wrote:
๏ปฟWe should (collectively) update GoFish because it doesn't work in
VFP10 64
bit yet either because of these controls.
E
On Tue, Apr 28, 2020 at 4:18 PM Matt Slay
wrote:
Here is what GoFish uses:
OLEObject = C:\Windows\SysWOW64\MSCOMCTL.OCX
- Matt Slay
On 4/28/2020 3:43 PM, Tracy Pearson wrote: We had enough problems with the Common controls we removed them
from our
product. Try to open a screen in our software and Windows attempting to run
an
installer. The file was there, and registered, but the installer
insisted it
was the wrong one. You are looking for one these files. I don't know which version was
attached
to the form: Microsoft Windows Common Controls 5.0 (SP2) File: c:\windows\syswow64\comctl32.ocx Microsoft Windows Common Controls 6.0 (SP6) File: c:\windows\syswow64\mscomctl.ocx
If you are on a Windows 10 64-bit OS, that is where they live. I don't use GF personally.
HTH, Tracy
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Paul H.
Tarver Sent: Tuesday, April 28, 2020 4:09 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
It looks like the Microsoft Visual Basic 6.0 Common Controls
download
only
updated my existing MSComCt files and didn't appear to install
anything
else
and my OLE error remains.
So I'm guessing it's something in a different distribution.
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Richard
Kaye Sent: Tuesday, April 28, 2020 12:38 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC it uses MS common controls circa VB6 so you might need to hunt
down
something like that.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul
H.
Tarver
Sent: Tuesday, April 28, 2020 11:05 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
After you brought up GoFish, I found a video on it and thought I'd
try to
use it, but I can't get v5 to run. I keep getting an OLE error code
that
a
class is not registered. If I click ok on the error the source
stops on a
reference to 'otree'. I cannot find any instructions to setup it up
or
any
pre-requisites as far as .ocx files that I need to have for it run.
I'd
like
to try it, but so far no go. (Also, I couldn't find a download for
the
4.3
version, so got stuck there too.)
Any ideas?
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Paul
Newton Sent: Tuesday, April 28, 2020 8:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I
tried
to
run it (in VFP9 SP2) the cursor changes to that circular one which
appears
when Fox is busy and GoFish refuses to load. Fox also displays
eventually
as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept) text/html
[excessive quoting removed by server]
Well, if I was really going to engage in a conversation about sentence construction, the original answer would have been that awful mas modifying "lot" and not "work". But this is more fun...
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of John Weller Sent: Wednesday, April 29, 2020 11:37 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
No - awful is correct! The amount of work Doug has done is enough to fill anyone with awe ๐
John Weller 01380 723235 07976 393631
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Richard Kaye Sent: 29 April 2020 16:31 To: profoxtech@leafe.com Subject: RE: GoFish problem
I knew I should have written "tremendous"... ๐
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Tracy Pearson Sent: Wednesday, April 29, 2020 11:20 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
Are you saying his work was awful or that he did a lot of work? <grin>
Tracy
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Richard Kaye Sent: Wednesday, April 29, 2020 11:10 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC Doug Hennig has done an awful of work with treeviews and released pure VFP based classes and many whitepapers about using them.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Frank Cazabon Sent: Tuesday, April 28, 2020 10:28 PM To: profoxtech@leafe.com Subject: Re: GoFish problem
Never used it but rendered this:
https://www.foxite.com/archives/html-treeview-in-vfp-0000450232.htm
On 28 April 2020 19:36:45 GMT-04:00, Matt Slay mattslay@jordanmachine.com wrote:
Eric - what UI control would be used in a VFP in place of the current OCX Treeview?
Matt Slay
On Apr 28, 2020, at 5:41 PM, Eric Selje Eric@saltydogllc.com wrote:
๏ปฟWe should (collectively) update GoFish because it doesn't work in
VFP10 64
bit yet either because of these controls.
E
On Tue, Apr 28, 2020 at 4:18 PM Matt Slay
wrote:
Here is what GoFish uses:
OLEObject = C:\Windows\SysWOW64\MSCOMCTL.OCX
- Matt Slay
On 4/28/2020 3:43 PM, Tracy Pearson wrote: We had enough problems with the Common controls we removed them
from our
product. Try to open a screen in our software and Windows attempting to run
an
installer. The file was there, and registered, but the installer
insisted it
was the wrong one. You are looking for one these files. I don't know which version was
attached
to the form: Microsoft Windows Common Controls 5.0 (SP2) File: c:\windows\syswow64\comctl32.ocx Microsoft Windows Common Controls 6.0 (SP6) File: c:\windows\syswow64\mscomctl.ocx
If you are on a Windows 10 64-bit OS, that is where they live. I don't use GF personally.
HTH, Tracy
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Paul H.
Tarver Sent: Tuesday, April 28, 2020 4:09 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
It looks like the Microsoft Visual Basic 6.0 Common Controls
download
only
updated my existing MSComCt files and didn't appear to install
anything
else
and my OLE error remains.
So I'm guessing it's something in a different distribution.
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Richard
Kaye Sent: Tuesday, April 28, 2020 12:38 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC it uses MS common controls circa VB6 so you might need to hunt
down
something like that.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul
H.
Tarver
Sent: Tuesday, April 28, 2020 11:05 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
After you brought up GoFish, I found a video on it and thought I'd
try to
use it, but I can't get v5 to run. I keep getting an OLE error code
that
a
class is not registered. If I click ok on the error the source
stops on a
reference to 'otree'. I cannot find any instructions to setup it up
or
any
pre-requisites as far as .ocx files that I need to have for it run.
I'd
like
to try it, but so far no go. (Also, I couldn't find a download for
the
4.3
version, so got stuck there too.)
Any ideas?
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Paul
Newton Sent: Tuesday, April 28, 2020 8:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I
tried
to
run it (in VFP9 SP2) the cursor changes to that circular one which
appears
when Fox is busy and GoFish refuses to load. Fox also displays
eventually
as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept) text/html
[excessive quoting removed by server]
_______________________________________________ Post Messages to: ProFox@leafe.com Subscription Maintenance: https://mail.leafe.com/mailman/listinfo/profox OT-free version of this list: https://mail.leafe.com/mailman/listinfo/profoxtech Searchable Archive: https://leafe.com/archives This message: https://leafe.com/archives/byMID/06a401d61e3c$113efce0$33bcf6a0$@johnweller.... ** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious. Report [OT] Abuse: http://leafe.com/reportAbuse/06a401d61e3c$113efce0$33bcf6a0$@johnweller.co.u...
FWIW I just ran the .APP for the current version of GoFish under Windows 10 x64 and it's fine.
Matt, it looks like with your tip, I got it going. I knew MSCOMCTL.ocx was on the computer I was testing on (Win7 64bit), but I decided to try to ty to re-register it manually just to make sure. Ran CMD as Admin and it dropped me into C:\Windows\System and without thinking I ran REGSVR32 MSCOMCTL.ocx and it failed. Re-reading your message I switched to C:\Windows\SysWow32, ran REGSVR32 again and this time the command worked. When back into VFP and ran the GOFISH.APP and it worked perfectly.
I don't know why the reinstallation of the VB6 Common tools didn't also re-register the .ocx, but manually doing it from the SysWow32 folder took care of the problem.
Thanks for the tip as I didn't know what OLE library I was supposed to focus on!
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Matt Slay Sent: Tuesday, April 28, 2020 4:18 PM To: profoxtech@leafe.com Subject: Re: GoFish problem
Here is what GoFish uses:
OLEObject = C:\Windows\SysWOW64\MSCOMCTL.OCX
- Matt Slay
On 4/28/2020 3:43 PM, Tracy Pearson wrote:
We had enough problems with the Common controls we removed them from our product. Try to open a screen in our software and Windows attempting to run an installer. The file was there, and registered, but the installer insisted
it
was the wrong one. You are looking for one these files. I don't know which version was
attached
to the form: Microsoft Windows Common Controls 5.0 (SP2) File: c:\windows\syswow64\comctl32.ocx Microsoft Windows Common Controls 6.0 (SP6) File: c:\windows\syswow64\mscomctl.ocx
If you are on a Windows 10 64-bit OS, that is where they live. I don't use GF personally.
HTH, Tracy
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Paul
H.
Tarver Sent: Tuesday, April 28, 2020 4:09 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
It looks like the Microsoft Visual Basic 6.0 Common Controls download only updated my existing MSComCt files and didn't appear to install anything
else
and my OLE error remains.
So I'm guessing it's something in a different distribution.
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of
Richard
Kaye Sent: Tuesday, April 28, 2020 12:38 PM To: profoxtech@leafe.com Subject: RE: GoFish problem
IIRC it uses MS common controls circa VB6 so you might need to hunt down something like that.
--
rk
-----Original Message----- From: ProfoxTech profoxtech-bounces@leafe.com On Behalf Of Paul H.
Tarver
Sent: Tuesday, April 28, 2020 11:05 AM To: profoxtech@leafe.com Subject: RE: GoFish problem
After you brought up GoFish, I found a video on it and thought I'd try to use it, but I can't get v5 to run. I keep getting an OLE error code that a class is not registered. If I click ok on the error the source stops on a reference to 'otree'. I cannot find any instructions to setup it up or any pre-requisites as far as .ocx files that I need to have for it run. I'd
like
to try it, but so far no go. (Also, I couldn't find a download for the 4.3 version, so got stuck there too.)
Any ideas?
Paul H. Tarver
-----Original Message----- From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Paul Newton Sent: Tuesday, April 28, 2020 8:26 AM To: profoxtech@leafe.com Subject: GoFish problem
Hi all
I have been happily using GoFish (4.3) for years but today when I tried to run it (in VFP9 SP2) the cursor changes to that circular one which appears when Fox is busy and GoFish refuses to load. Fox also displays eventually as Not Responding. Any ideas/suggestions? Many thanks
Paul Newton
--- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html
[excessive quoting removed by server]
-
Alan Bourke -
Eric Selje -
Frank Cazabon -
John Weller -
Koen Piller -
Matt Slay -
Paul H. Tarver -
Paul Newton -
Richard Kaye -
Tracy Pearson